Prabha Trade Impex Pvt Ltd

Home

About Us

Products
 Lubricants
    Problem Solutions
    Molykote 111
    Molykote BG 555
    Molykote P 37
    Molykote Range
    Molykote TP 42
    Molykote MOS2 Powder
    Molykote Zinc Spray

 RTV Silicone Sealants
  Engg / Auto Industry
    Silastic 732
    Silastic 733
    Silastic 734
    Silastic 736
    Silastic 1080
    Silastic Auto Sealant

 Solar Sealants
    SH 780

 Release Products
    DC 200 Silicone Oil
    4P Silicon Spray

 Paints
    Spray Paints

 Powder Coating
   OptiFlex Manual
   OptiFlex Automatic

 Metal Treatment Chemicals
   Frank Chemicals

 MG Chemicals
   Epoxies
   Protective Coatings

 EMI / RFI Shielding
   Chomerics

 Leak Repair
   AquaFix

Links

Contact Us

     

             
Molykote Solutions to your Lubrication Problems.

Molykote® brand lubricants include a complete line of multi-purpose oils, synthetic and ultra-high-purity mineral-oil fluids, specialty compounds, greases, pastes, anti-friction coatings, and more trusted by engineers to solve or prevent lubrication problems.

Rolling-Elements Bearing User Problems Requirement Molykote Solutions Short life due to high loads Multi-purpose grease with MoS2 Molykote BR2 Plus Ability to operate at extremely low temperatures ( to -70°C ) Low to moderate loads and speeds Molykote 33 Short life due to high temperatures ( up to 160°C continuous ) Moderate to high loads and low to moderate speeds Molykote FB 180 Short life due to very high temperatures ( up to 180°C continuous ) Moderate to high loads and high speeds Molykote BG 20 Short life due to very high temperatures ( up to 200°C continuous ) Low to moderate loads and speeds Molykote 44 Short life due to extremely high temperatures ( up to 250°C continuous ) Resistant against solvents and other aggressive chemicals Molykote BG 87 Short life due to extremely high temperatures ( up to 230°C continuous ) Heavy duty and chemically resistant grease Molykote FS 3451 Short life due to extremely high temperatures ( up to 230°C continuous ) Low to moderate loads and speeds Molykote 7348 Need for operation in very high vacuum environment Service temperatures from -35 to +250°C Molykote HP-300 Lubricant failure because of aggressive environmental influence Service temperatures from -35 to +250°C Service temperatures from -35 to +250°C Service temperatures from -40 to +200°C Service temperatures from -40 to +230°C Molykote BG 87 Molykote HP-300 Molykote FS 1292 Molykote FS 3451 Noise Service temperatures from -40 to +150°C Molykote BG 555   Shaft/Hub Connections User Problems Requirement Molykote Solutions Stick-slip and damage during assembly and running-in Dry film lubricant coating Pretreatment with solid lubricants Adhesive pretreatment assembly paste Molykote D 321 R Molykote G-Rapid Plus Molykote G-n Plus High wear, stiff operation, fretting corrosion, increased tolerances Multi-purpose grease with MoS2 Extreme pressure MoS2 grease Fretting corrosion Molykote BR 2 Plus Molykote Longterm 2 Plus Molykote P 40 Short life and lubrication intervals owing to wet environment White long-life and water resistant grease Extreme pressure and water resistant grease Molykote Longterm W2 Molykote Longterm 2 Plus   Steel gear wheels in open gears User Problems Requirement Molykote Solutions High wear, pitting or corrosion on gear wheels running at low to medium speeds (up to 2 m/s) Adhesive pretreatment assembly paste Pretreatment with solid lubricants Protection against fretting corrosion Adhesive grease against fretting corrosion Protects against wear due to high loads Synthetic grease with solid lubricants G-n Plus G-Rapid Plus TP 42 G 67 165 LT Molykote 1122 High wear, pitting or corrosion on gear wheels running at high speeds (up to 6 m/s) Good water and moisture resistant grease (spray) Adhesive grease in difficult operating conditions Molykote S-1004 Molykote 1122     Plastic gear wheels in enclosed gears User Problems Requirement Molykote Solutions Running-in damage, stick-slip, scuffing, seizure White synthetic grease with solid lubricants General purpose grease for plastic lubrication Molykote PG-30L Molykote PG-602 High wear and short life owing to high temperatures or heavy loads. Swelling, shrinking, stress cracks, change in strength characteristics due to inadequate lubricant White silicone grease for wide temperature range White synthetic grease with solid lubricants for extreme pressure White silicone grease with solid lubricants Semi-synthetic grease for enclosed plastic and steel gears General purpose, semi-synthetic grease General purpose grease for plastic lubrication Synthetic grease with solid lubricants for extreme pressure PG 21 PG-30L PG 54 G 68 PG 75 PG-602 YM-103   Seals and Packings User Problems Requirement Molykote Solutions Damage due to lubrication failure under aggressive environmental influences Resistant against solvents and other aggressive chemicals Silicone compound resistant against solvents and gases Chemically resistant fluoro-silicone grease   BG 87   Molykote 111 Molykote FS 3452 Shrinkage, swelling and stress cracking due to lubricant incompatibility White synthetic grease with solid lubricants compatible with many plastics Synthetic grease with noise dampening capacity Low temperature synthetic grease compatible with many plastics Synthetic grease compatible with many plastics, protects against stress-cracking formation General purpose silicone compound Molykote PG-30L EM-50L Molykote EM-60L Molykote BG 87 Molykote 111   Steel gear wheels in enclosed gears User Problems Requirement Molykote Solutions Running-in damage Pretreatment assembly paste   Dry film lubricant coating Molykote G-Rapid Plus Molykote D 321 R Wear, pittings MoS2 additive for gear oils Adhesive, semi-fluid mineral oil grease Synthetic grease with solid lubricants Molykote M 55 Plus Molykote Longterm 00 Molykote 1122 Short life due to high temperatures, high load in helical steel drive gears Good oxidation and thermal stability Molykote L-1115-ISO 150 Short life due to high temperatures (=75°C) in helical steel drive gears in food processing plant Good oxidation and thermal stability Food grade Molykote L-1115 FG-ISO 150 High maintenance cost due to frequent oil changes in worm gears that are difficult to access Synthetic food grade gear oil Molykote L-1146 FG-ISO 460 Corrosion protection in worm gears made out of bronze No sulphur phosphorous EP additives Molykote L-1146-ISO 460 Steel gears in area of a food processing plant, prone to frequent wash downs Food grade High resistance to water emulsification Molykote L-1115FG-ISO 150   Sliding contact bearings made of metal User Problems Requirement Molykote Solutions Stick-slip and damage during assembly and running-in Dry film lubricant coating Adhesive pretreatment assembly paste Pretreatment assembly paste   Molykote D 321 R Molykote G-n Plus Molykote G-Rapid Plus Scuffing, scoring, high wear. Short life due to high load Multi-purpose grease with MoS2 Extreme pressure MoS2 grease   Molykote BR 2 Plus Molykote Longterm 2 Plus Short life and lubrication intervals owing to wet environment White long-life and water resistant grease   Extreme pressure and water resistant grease Molykote Longterm W2 Molykote Longterm 2 Plus   Sliding contact bearings made of plastic User Problems Requirement Molykote Solutions Running-in damage, stick-slip, scuffing, seizure White synthetic grease with solid lubricants Extreme pressure synthetic grease paste General purpose grease for plastic lubrication Molykote PG-30L Molykote PPE Molykote PG 602 High wear, stiff operation, stress cracks, swelling, shrinking, effect on hardness due to inadequate lubricant, short life owing to high temperatures or high loads White silicone grease for wide temperature range White synthetic grease with solid lubricants for extreme pressure White silicone grease with solid lubricants General purpose, semi-synthetic grease General purpose grease for plastic lubrication Synthetic grease with solid lubricants for extreme pressure Molykote PG 21 Molykote PG-30L Molykote PG 54 Molykote PG 75 Molykote PG 602 Molykote YM-103   Linear sliding guides User Problems Requirement Molykote Solutions Stick-slip and damage during assembly and running-in Adhesive pretreatment assembly paste Pretreatment assembly paste Multi-purpose grease with MoS2 Extreme pressure MoS2 grease   Molykote G-n Plus Molykote G-Rapid Plus Molykote BR 2 Plus Molykote Longterm 2 Plus Scuffing, scoring, high wear, short life due to high load Multi-purpose, moderate load and food grade  ( USDA H1 ) grease Synthetic grease for high loads on metals General purpose, semi-synthetic grease White synthetic grease with solid lubricants for extreme pressure Silicone grease for plastics with wide temperature range Molykote G-4500 Molykote G-4700 Molykote PG 75 Molykote PG-30L Molykote 33 Short life and lubrication intervals owing to wet environment White long-life and water resistant grease Extreme pressure and water resistant grease   Molykote Longterm W2 Molykote Longterm 2 Plus Fretting corrosion White, extreme pressure solid lubricant paste Adhesive lubricant against fretting corrosion Molykote DX Molykote G 67   Linear motion guides User Problems Requirement Molykote Solutions High lubricant usage with oil lubrication Coat with AF Coating then apply thin film of DX paste Molykote 3402 C + DX High wear due to intermittent operation or by small movement Dry film lubricant for short travel distances Molykote 3402 C Insufficient accuracy as a result of surface rolling and wear Apply both lubricants due to increased loads Apply both lubricants due to high loads and medium speeds Molykote 3402 C + DX Molykote 3402 C + Longterm 2 Plus   Chains User Problems Requirement Molykote Solutions High wear and short service life caused by high temperatures or heavy loads Semi-synthetic chain oil High temperature synthetic chain oil Service temperatures from -30 to +250°C High temperature / low friction synthetic chain oil, up to +250°C Adhesive / low friction synthetic chain oil, up to +250°C Solvent free high temperature chain oil Molykote S-1500 Molykote S-1501 Molykote S-1502 Molykote S-1503 Molykote S-1504 Molykote CO 220 High wear and short service life due to insufficient lubrication at high speeds Adhesive chain lubricant with MoS2 Molykote MKL-N High wear and short service life caused by extreme temperatures or heavy loads Dry lubrication by solid lubricants up to +450°C Molykote M 30 High wear and corrosion due to heavy loads and wet environments Black chain lubricant for grease nipples Adhesive paste for normal and stainless steel chains Molykote 1122 Molykote P 40   High wear and corrosion due to high water washout High resistance to water emulsification High film strength Molykote L-1460FG High wear and short service life caused by very low temperatures Food grade Pour point < -60°C Molykote L-1468FG   Planetary roller screws User Problems Requirement Molykote Solutions Contamination as a result of high lubricant delivery during oil lubrication Dry film, oil resistant lubricant Molykote 7409 Increased wear caused by lubricant oxidation or decomposition at extreme temperatures or under aggressive ambient conditions Silicone grease for high and very low temperatures Silicone grease with wide temperature range Chemically resistant fluoro-silicone grease Molykote 33 Molykote 44 FS 3451 Wear caused by high centrifugal forces at the bearing guide system as a result of high speeds General purpose grease Synthetic grease for high speeds Molykote Multilub Molykote BG 20   Bolts, Studs User Problems Requirement Molykote Solutions Fretting and seizure on bolts made of austenitic stainless steel White assembly paste Black, metal-free assembly paste Dry film lubricant coating Molykote D Molykote P 74 Molykote D 321 R Fretting and seizure on bolts with galvanized surface Very low assembly torque Dry coating preferred Molykote G-Rapid Plus Molykote D 321 R Broken bolts and stripped threads owing to scatter of friction coefficient Consistent assembly torque Dry film lubricant coating Molykote 1000 Molykote 7405 Fretting and seizure on bolts exposed to low to medium temperatures and corrosive environments Metal-free lubricating paste Molykote P 40 Broken bolts due to stress cracks on thread surfaces Seizure or broken bolts due to unsuitable lubricants Seizure or broken bolts due to high temperature and corrosive environments High temperature threads (nickel alloys ) Multi-purpose copper paste High temperature antiseize paste Molykote P 37 Molykote P 1600 Molykote HSC Plus   Press-fit-Joints User Problems Requirement Molykote Solutions Difficult and time consuming assembly because of stick-slip; scuffing, scoring or component damage during press-fitting Adhesive pretreatment assembly paste White assembly paste Pretreatment with solid lubricants Molykote G-n Plus Molykote D Molykote G-Rapid Plus   Maintenance, Repairs User Problems Requirement Molykote Solutions Difficult dismantling owing to corrosion and rust ' 5 in 1 ' Penetrating oil Molykote Multigliss Molykote Supergliss Contaminated components Metal / Brake cleaner Molykote Metal Cleaner Stick-slip and damage during assembly and running-in Adhesive pretreatment assembly paste Pretreatment with solid lubricants Molykote G-n Plus Molykote G-Rapid Plus Corroded components due to corrosive environment Adhesive copper paste Molykote Cu-7439 plus Seized or broken bolted connections White assembly paste Pretreatment with solid lubricants Consistent assembly torque High temperature threads (Nickel alloys ) Molykote D G-Rapid Plus Molykote 1000 Molykote P 37 Wear, pittings and noise MoS2 additive for motor and gear oils Molykote A Corrosion Dry, transparent corrosion protector Molykote Metal Protector Plus Difficult applications which are not equipped with grease nipples Low viscosity solid lubricant dispersion Molykote Omnigliss Short life and lubrication intervals owing to wet environment. Adhesive lubricant dispersion Molykote Polygliss-N Welding spots on welding tools and metal surfaces Transparent, water based fluid Molykote S-1000 Sticking of molded components Non silicone release fluid Molykote S-1001 Dust contamination in electrical components Electrical contact cleaner Molykote S-1002 Damage of drills and components Cutting fluid Molykote S-1003 Sticking of rubber, metal and plastic parts Silicone release agent and lubricant Molykote Separator Spray Repair damaged galvanized surfaces Corrosion protective dry film coating Molykote L-0500   Vaccum pumps, Air compressors User Problems Requirement Molykote Solutions Short lubricant lifetime, faulty pump performance Good oxidation and thermal stability Molykote L-0610 Short service life due to high exposure to water vapour in food processing environment Food grade High resistance to water emulsification Molykote L-1668FG   Short service life due to varnish built up Good oxidation and thermal stability Molykote L-0246 Short service life due to high temperatures Synthetic base oil (PAO) Food grade Synthetic base oil (PAG/POE blend) Molykote L-1246 Molykote L-1246FG Molykote L-3232 Short service life due to very high temperatures and pressures (as in piston compressors) Synthetic base oil (POE) Molykote L-4646   Hydraulic pumps User Problems Requirement Molykote Solutions Extend service life Good oxidation and thermal stability Molykote L-0346 Short service life due to water emulsification High resistance to water emulsification Food grade Molykote L-1346 Molykote L-1346FG Low pour point oil Wide temperature range (-60 to +250°C) Molykote L-1368FG
Home | About Us | Lubricants | Problem Solutions | Molykote 111 | Molykote BG 555 | Molykote P 37 Molykote Range | Molykote TP 42 | Molykote MOS2 Powder | Molykote Zinc Spray | Silastic 732 | Silastic 733 Silastic 734 | Silastic 736 | Silastic 1080 | Silastic Auto Sealant | SH 780 | DC 200 Silicone Oil | Metal treatment Chemical 4P Silicon Spray | | Spray Paints | OptiFlex Manual | OptiFlex Automatic | Links | Contact Us

Flat no 1A, Bhavani Bhavan, Siripuri Colony, Karkhana, Secunderabad - 500 015

Telephone : +91 40 27743464 / 40206890

PTI Director Mobile: +91 9000420684

Mail/Fax your enquiries