Prabha Trade Impex Pvt Ltd
Home
About Us
Products
Lubricants
Problem
Solutions
Molykote
111
Molykote
BG 555
Molykote
P 37
Molykote
Range
Molykote
TP 42
Molykote
MOS2 Powder
Molykote
Zinc Spray
RTV Silicone Sealants
Engg / Auto Industry
Silastic
732
Silastic
733
Silastic
734
Silastic
736
Silastic
1080
Silastic
Auto Sealant
Solar Sealants
SH
780
Release Products
DC
200 Silicone Oil
4P Silicon Spray
Paints
Spray Paints
Powder
Coating
OptiFlex
Manual
OptiFlex
Automatic
Metal Treatment Chemicals
Frank Chemicals
MG Chemicals
Epoxies
Protective Coatings
EMI / RFI Shielding
Chomerics
Leak Repair
AquaFix
|
|
Silicone Oil Best for Industrial Use |
|
Description :
Dow
Corning 200 fluid - Silicone Oil - Polydimethlysiloxane Features : Water-clear silicone fluid available in viscosities ranging from 0.65 to 60,000 cSt (mm²/s). Little change in physical properties over a wide temperature span - a relatively flat viscosity-temperature slope, and service ability from 40 °C up to 200°C. Excellent water repellency. Good dielectic properties over a wide range of temperatures and frequencies. Low surface tension - readily wets clean surfaces to impart water repellency and release characteristics. Viscosities above 10 mm²/s also exhibit heat stability, oxidation resistance, very low vapour pressures, and high flash point. Low order of toxicity. Essentially odourless. Soluble in a wide range of solvents. Non-greasy and non-rancidifying. Applications : Release Material: Used alone or as part of a compounded formula, DOW CORNING 200 Fluid provides a non-carbonising mould release for rubber, plastics, and metal die castings. Foam Preventitive: Extremely small amounts of the fluid effectively control foam in many processing operations, especially in non-aqueous systems. Mechanical Fluid: Excellent viscosity-temperature characteristics, thermal and chemical stability, shear-breakdown resistance, compressibility, and rubber compatibility make DOW CORNING 200 Fluid outstanding for mechanical/ hydraulic uses. Typical uses include hydrolic stabilisers, damping media. Surface-Active Material: Added to vinyl plastisols, DOW CORNING 200 Fluid improves the flow characteristics, de-aerates and lubricates the surface of the completed part. Lubricant: The fluid provides excellent lubrication for most plastic and elastomeric surfaces. Lubricity with metals depends upon the combination involved. Care should be taken to select suitable metals for pumps and other items with moving parts. Cosmetics And Skin Preparations: DOW CORNING 200 Fluid is an important ingredient in hand creams, skin protectants, suntan lotions, and hair grooming aids because it forms a non-greasy, protective film which resists water and waterborne irritants, yet allows the skin to breathe. Literature is available that details the use of the fluid in cosmetics. Polishes And Chemical Specialities: DOW CORNING 200 Fluid is used in most automobile and furniture polishes for its ease of application, high gloss with minimum rubbing, and a durable water-repellant film. It is also used in many other speciality formulations, including aerosol starches and fabric conditioners. Additional literature is available. Electrical / Electronic Equipment: With excellent dielectric properties, DOW CORNING 200 Fluid can be used for both insulating and damping applications. Plastic Additive: Small amounts of DOW CORNING 200 Fluid can be compounded into plastic in order to impart surface slip or anti-block and to improve the processability of the plastic. Caution : Users are advised to conduct their own tests to check suitability to specific applications. Molykote, Silastic & Dow Corning are registered brand names of Dow Corning Corporation, USA. |
|
Telephone : +91 40 27743464 / 40206890 PTI Director Mobile: +91 9000420684
Flat no 1A, Bhavani Bhavan, Siripuri
Colony, Karkhana, Secunderabad - 500 015
Mail/Fax your enquiries