Prabha Trade Impex Pvt Ltd
Home
About Us
Products
Lubricants
Problem
Solutions
Molykote
111
Molykote
BG 555
Molykote
P 37
Molykote
Range
Molykote
TP 42
Molykote
MOS2 Powder
Molykote
Zinc Spray
RTV Silicone Sealants
Engg / Auto Industry
Silastic
732
Silastic
733
Silastic
734
Silastic
736
Silastic
1080
Silastic
Auto Sealant
Solar Sealants
SH
780
Release Products
DC
200 Silicone Oil
4P Silicon Spray
Paints
Spray Paints
Powder
Coating
OptiFlex
Manual
OptiFlex
Automatic
Metal Treatment Chemicals
Frank Chemicals
MG Chemicals
Epoxies
Protective Coatings
EMI / RFI Shielding
Chomerics
Leak Repair
AquaFix
|
|
Best for Industrial Use |
|
Description : Silastic 732 is a high performance, one-part silicone sealant that offers excellent adhesion (usually without a primer), elasticity, wide temperature resistant and long life reliability. Important Features : Ease of use - one part, no mixing required, Non slumping, Non shrinking. Does not crack, crumble or dry out in direct Sunlight. Excellent temperature range -65°C to +232°C. Meets FDA requirement No : 21 CFR 177-2600 (food contact), MIL-A-46106 parts I & II. Bonds almost all surfaces. Chemically stable. Colours : Clear, Black & White. Uses : Gasketing in heating & refrigerating units, fixing screw less brackets or name plates and tacking plastic materials to metals. Sealing windows in oven doors and flues on gas appliances, flanged pipe joints, access doors. Formed in place of gaskets for gearboxes, compressors and pumps. Sealing trailers, truck cabs. Bonding and sealing appliance parts. Anti abrasion coating. Sealing of marine cabins and windows. Filling and caulking joints in sheet metals stacks, duct work and equipment housings. Limitations : On contact, uncured sealant may cause irritation, avoid contact with eyes and skin. Packing : 100 GM tube & 300 GM cartridges (Suitable Caulking guns available). Typical Properties : Flow, sag or sump - nil Tack free time at 25°C & 50 % RH - 10 to 20 min. Cure time at 25°C & 50 % RH -1 to 2 days After curing for 7 days ASTM D 676 - Durometer Hardness, Shore A - 30 ASTM D 412 - Ultimate Tensile Strength - 350 psi (mpa) ASTM D 412 - Elongation % - 500 Caution : Users are advised to conduct their own tests to check suitability to specific applications. Molykote, Silastic & Dow Corning are registered brand names of Dow Corning Corporation, USA. |
Home | About Us | Lubricants | Problem Solutions | Molykote 111 | Molykote BG 555 | Molykote P 37 Molykote Range | Molykote TP 42 | Molykote MOS2 Powder | Molykote Zinc Spray | Silastic 732 | Silastic 733 Silastic 734 | Silastic 736 | Silastic 1080 | Silastic Auto Sealant | SH 780 | DC 200 Silicone Oil | Metal treatment Chemical 4P Silicon Spray | | Spray Paints | OptiFlex Manual | OptiFlex Automatic | Links | Contact Us |
Flat no 1A, Bhavani Bhavan, Siripuri
Colony, Karkhana, Secunderabad - 500 015 Telephone : +91 40 27743464 / 40206890 PTI Director Mobile: +91 9000420684
Mail/Fax your enquiries