Prabha Trade Impex Pvt Ltd
Home
About Us
Products
Lubricants
Problem
Solutions
Molykote
111
Molykote
BG 555
Molykote
P 37
Molykote
Range
Molykote
TP 42
Molykote
MOS2 Powder
Molykote
Zinc Spray
RTV Silicone Sealants
Engg / Auto Industry
Silastic
732
Silastic
733
Silastic
734
Silastic
736
Silastic
1080
Silastic
Auto Sealant
Solar Sealants
SH
780
Release Products
DC
200 Silicone Oil
4P Silicon Spray
Paints
Spray Paints
Powder
Coating
OptiFlex
Manual
OptiFlex
Automatic
Metal Treatment Chemicals
Frank Chemicals
MG Chemicals
Epoxies
Protective Coatings
EMI / RFI Shielding
Chomerics
Leak Repair
AquaFix
|
|
Silicone Mould Release Spray - Best for Industrial Use |
|
Type : Silicone Polymer Spray rate : 0.7 to 1.0 gram / second Thermal stability : -50 to 400 o C Covering area : 21 TO 23 Sq.cm @ 9 to 10 inches between the nozzle and the mould. Spray cone angle : 30 to 40 deg Coating thickness : 3 to 4 microns @ 9 to 10 inches between the nozzle and the mould. Packing : 600 ml aerosol can. Packed in carton, containing 25 cans. Toxicity : Contents are non toxic. Performance : Non sticky, low surface tension (high film forming capacity), and excellent flow friction coupled with lubricating qualities of the formulation helps the shop floor men to increase productivity. For moulding Polyethylene, Polypropylene, HIPS,Acrylics, Polyurethanes, Bakelite, Polyesters, Cellulose, SBR, Natural Rubber, Nitrile, Neoprene, Fluorosilicone Polymers, etc. Material safety data : Contents under pressure. Do not expose to higher temperature or flame.Shall be disposed carefully when the content is emptied. Do not drop the can.
|
|
Flat no 1A, Bhavani Bhavan, Siripuri
Colony, Karkhana, Secunderabad - 500 015 Telephone : +91 40 27743464 / 40206890 B Ravi Mobile: +91 9000420684
Mail/Fax your enquiries